NEA Nuclear Data High Priority Request List, HPRL

HPRL Main High Priority Requests (HPR) General Requests (GR) Special Purpose Quantities (SPQ) New Request SGC/HPRL Documents

Request ID39 Status of the request High Priority request
TargetReaction and processIncident EnergySecondary energy or angleTarget uncertaintyCovariance
 94-PU-242 (n,f) SIG  200 keV-20 MeV  See details Y
FieldSubfieldDate Request createdDate Request acceptedOngoing action
 Fission Fast Reactors 15-SEP-08 15-SEP-08 

Send comment Send a comment on this request to NEA.

Requester: Prof. Massimo SALVATORES at CADARACHE, FR

Project (context): CEA Cadarache

Design phases of selected reactor and fuel cycle concepts require improved data and methods in order to reduce margins for both economical and safety reasons. A first indicative nuclear data target accuracy assessment was made within WPEC Subgroup 26 (SG-26). The assessment indicated a list of nuclear data priorities for each of the systems considered (ABTR, SFR, EPR, GFR, LFR, ADMAB, VHTR, EPR). These nuclear data priorities should all be addressed to meet target accuracy requirements for the integral parameters characterizing those systems (see the accompanying requests originating from SG-26).

Target accuracies are specified per system and per energy group when they are not met by the BOLNA estimate of the current (initial) uncertainties. The weighting factor λ is explained in detail in the accompanying document. Changes from the reference value of λ=1 show the the possible allowance for other target uncertainties. Two cases (A and B) are distinguished for λ≠1 (see Table 24 of the report).

Energy RangeInitial versus target uncertainties (%)
λ=1 λ≠1,b λ=1 λ≠1,a λ=1 λ≠1,a λ=1 λ≠1,a λ=1
6.07 - 19.6 MeV 37 15 14
2.23 - 6.07 MeV 15 5 5 6 6 7 8 7
1.35 - 2.23 MeV 21 5 4 5 6 7 7 5
0.498 - 1.35 MeV 19 4 3 11 9 4 4 4 4 4
183 - 498 keV 19 9 8

Justification document:
OECD/NEA WPEC Subgroup 26 Final Report: "Uncertainty and Target Accuracy Assessment for Innovative Systems Using Recent Covariance Data Evaluations" (link to WPEC Subgroup 26 Report in PDF format, 6 Mb).

Comment from requester:
Given the present state of knowledge the above target accuracies are very tight. However, any attempt that significantly contributes to reducing the present accuracy for this quantity is strongly encouraged. Any such attempt will significantly enhance the accuracy with which reactor integral parameters may be estimated and will therefore impact economic and safety margins.

Comments from evaluator/experimentalist:

Comments for achieved accuracy:
See accuracy details

Review comment:

Additional file attached: SG26-report.html