The International Handbook of Evaluated Reactor Physics Experiments contains reactor physics benchmark specifications that have been derived from experiments that were performed at various nuclear facilities around the world. The benchmark specifications are intended for use by reactor designers, safety analysts and nuclear data evaluators to validate calculational techniques and data. The handbook is a product of the International Reactor Physics Evaluation (IRPhE) project, conducted by the OECD Nuclear Energy Agency (NEA). While co-ordination and administration of the IRPhE project is undertaken by the NEA, each participating country is responsible for the administration, technical direction, and priorities of the project within their respective countries. Access to some of the information and data included in this handbook may be restricted; full conditions for access are available below.
The 2019 edition contains data from 162 different experimental series that were performed at 56 different nuclear facilities. Some 162 of the 166 evaluations are published as approved benchmarks. The remaining four evaluations are published as draft documents only. All draft documents were reviewed by the International Reactor Physics Evaluation (IRPhE) Technical Review Group (TRG). Example calculations are presented; however, these calculations do not constitute validation or endorsement of the codes or cross section data. The IRPhE project is patterned after the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and is closely co-ordinated with the ICSBEP. Some benchmark data are applicable to both nuclear criticality safety and reactor physics technology. Some have already been evaluated and published by the ICSBEP, but have been extended to include other types of measurements besides the critical configuration.
Comments (recommendations, additions, deletions and corrections), which may be of use in improving this handbook, should be addressed to:
John D. Bess
The Handbook is published in electronic format (pdf files), where the experiments are grouped into evaluations, categorised by (1) Reactor Name, (2) Reactor Type, (3) Facility Type, and (4) Measurement Type.
The IRPhEP Handbook is available to authorised requesters from the OECD member countries and to contributing establishments from non-OECD countries. Other requests are handled on a case by case basis. Find out more about the restrictions, the disclaimer, and providing feedback
If you have already been authorised access to the 2019 edition, you can access it through the link below:
If you have already been authorised access to the 2018 edition, you can access it through the link below:
For questions or more information, please send an e-mail to .
Last reviewed: 22 November 2019