Post-test view inside OLHF-4 vessel showing penetrations and resolidified weld material at the vessel bottom.

During a severe accident, the lower head of a reactor pressure vessel (RPV) can be subj...

                                                                                  EPICUR facility, IRSN.

STEM phases

First phase (2011-2015)

The STEM Project was initiated with a first phase in 20...

Photo: RBHT Test Facility. US NRC.

Modelling reactor core behaviour under accident conditions with delayed re-introduction of cooling water (commonly referred to as reflood) is a challenge for safety...

Illustration of the Horonobe Underground Research Laboratory and locations of the in situ experiments planned in each of the three HIP Joint Project task

The Horonobe International Project (HIP) is a...

View of the RASPLAV-3 Facility.

The Material Scaling (MASCA) Project was a follow-up of the RASPLAV Project and investigated in-vessel phenomena during a severe accident with core melt. Specifica...

Scheme of the PSB-VVER facility, EREC

The NEA PSB-VVER project provided unique and useful experimental data for code validation using the PSB-VVER test facility. The PSB-VVER facility is a large-scal...

PKL facility. Photo: FRAMATOME, Germany

The Primärkreislauf-Versuchsanlage (Primary Coolant Loop Test Facility [PKL]) is a facility owned and operated by Framatome GmbH (formerly AREVA NP) in Erlange...

^{View of the ATLAS experimental loop. KAERI, Korea}

The Advanced Thermal-hydraulic Test Loop for Accident Simulation (ATLAS) Project was referenced in The Fukushima Daiichi Nuclear Power Plant Accident...

Scheme of the ROSA LSTF facility, JAEA

The Rig-of-safety Assessment (ROSA) Project aimed to resolve issues in thermal-hydraulics analyses relevant to light water reactor (LWR) safety using the Japa...

General view of the EREC test facility BC V-213, source: EREC

There are several VVER-440/213* type nuclear power plants operating in the Czech Republic, Hungary, Slovak Republic, Russia and Ukraine...