General view of the EREC test facility BC V-213, source: EREC

There are several VVER-440/213* type nuclear power plants operating in the Czech Republic, Hungary, Slovak Republic, Russia and Ukraine...

Electrical cable fire test, IRSN.

The NEA PRISME project addressed in a series of 3 phases from 2006 till 2022 fire risk research. Operating experience shows that fire is one of the highest risks i...

In a core melt accident, if the molten core is not retained in-vessel despite severe accident mitigation actions, the core debris will relocate to the reactor cavity region and interact with the stru...

PAKS Nuclear Power Plant, Hungary.

During a fuel crud removal operation on the Paks-2 unit on 10 April 2003, several fuel assemblies were severely damaged. The assemblies were being cleaned in a sp...

Image at melt distribution and its contour at MBC (KAERI).

The Committee on the Safety of Nuclear Installations (CSNI) Working Group on Analysis and Management of Accidents (WGAMA) initiated a co...

Scheme of the THAI+ facility, Becker Technologies.

The experimental investigations carried out in the frame of the THAI (2007-2009), THAI-2 (2011-2014) and THAI-3 (2016-2019) projects contributed s...

Scheme of the PKL facility, Framatome GmbH.

The SESAR Thermal-hydraulics (SETH) Project began in 2001 and consisted of thermal-hydraulic experiments in support of accident management, which were ca...

View looking down onto the LOFT reactor

The Loss-of-fluid Test (LOFT) Research Programme was originally set up by the US Nuclear Regulatory Commission. Part of the programme was later broadened int...

Irradiation Vessel with Coupons, CNL

The NEA Behaviour of Iodine Project (BIP) was created to provide separate effects and modelling studies of iodine behaviour in a nuclear reactor containment bui...

Photos: SFP testing. Left: fuel assembly after a Zr fire; right: fire ignition test. SNL/USNRC.

The goal of the Sandia Fuel Project was to provide experimental data relevant for hydraulic and ignitio...