Since the early 2000s there is an increasing demand from nuclear research, industry, safety and regulation for best-estimate predictions to be provided with their confidence bounds. Consequently, an ...

The modelling and simulation of nuclear systems allow scientists and engineers to probe aspects of the operation of these systems beyond what has been precisely measured. This has numerous applicatio...

Proceedings of the Fourteenth Workshop, 30 October-2 November 2018, Gyeongju, Korea.

In the past decade, a large amount of effort has been made towards the direct simulation of the boiling transition (BT) for boiling water reactor (BWR) fuel bundles. This international benchmark, bas...

The purpose of this prismatic High Temperature Reactor (HTR) benchmark is to provide a solution set that can be used in future code benchmarking and to better understand the effects induced by the pr...

This benchmark focuses on FHR reactors with plates and triso fuel. Several phases are planned, starting with neutronics on a simple fuel element simulation without burn-up, and gradually extending to...

In the past decade, a large amount of effort has been made towards the direct simulation of the boiling transition (BT) for Boiling Water Reactor (BWR) fuel bundles. This international benchmark, bas...

The high-temperature gas-cooled reactor (HTGR) is a Generation IV reactor concept that uses a graphitemoderated gas-cooled nuclear reactor with a once-through uranium fuel cycle. This design permits ...

In 2013, the Expert Group on Reactor Physics and Advanced Nuclear Systems (EGRPANS) published a report that investigated fuel depletion effects in a pressurised water reactor (PWR). This was entitled...

Sodium fast reactors offer the most promising type of reactors to achieve such Generation IV goals at a reasonable time scale given the experience accumulated over the years. However, it is recognise...

The need to refine models for best-estimate calculations based on good-quality experimental data has arisen for various nuclear applications. One of the most extensive and valuable databases availabl...

The objective of the benchmark was twofold. First, the benchmark aimed to evaluate currently available computational approaches in an effort to understand the strengths and weaknesses of current ther...

Twelfth Workshop Proceedings, Batavia, Illinois, United States, 28-30 April 2014

This report defines the “OECD/NEA/NSC PBMR Coupled Neutronics/Thermal-hydraulics Transient Benchmark of the PBMR-400 Core Design”. This chapter gives more information on the day-to-day management of ...

The objective of the OECD LWR UAM activity is to establish an internationally accepted benchmark framework to compare, assess and further develop different uncertainty analysis methods associated wit...

Based on the success of the OECD/NRC BFBT Benchmark, Japan released data based on the NUPEC PWR Sub-channel and Bundle Tests (PSBT) Benchmark and asked Pennsylvania State University (PSU) in the Unit...

Recently developed best-estimate computer code systems for modelling 3-D coupled neutronics/thermal-hydraulics transients in nuclear reactors need to be validated against results from experiments and...

This report provides the specification for the uncertainty exercises of the international OECD/NEA, NRC and NUPEC BFBT benchmark problem including the elemental task. The specification was prepared j...

In the field of coupled neutronics/thermal-hydraulics computation there is a need to enhance scientific knowledge in order to develop advanced modelling techniques for new nuclear technologies and co...