In the current project, a new systematic approach has been developed, called SAPIUM (systematic approach for input uncertainty quantification methodology) for transparent and rigorous model IUQ. This...

Recent operating experience in nuclear power plants has shown that there is a safety concern associated with the use of new industrial devices, including digital devices, in safety power systems in b...

Cabri Reactor (Commissariat à l’énergie atomique et aux énergies alternatives)

The Cabri International Project (CIP) began in March 2000 to study the behaviour of nuclear fuel rods and cladding durin...

A cabinet containing copper bus before the HEAF test (left) and after the test(right). Source: NRC

Massive electrical discharges, referred to as high energy arcing faults (HEAF), have occurred in nuc...

With the growing importance of SMRs, following the proposal of the CSNI Bureau, the CSNI has decided to create an Expert Group on SMRs (EGSMR), at its 69th meeting held on 2-3 June 2021.

Left: Test facility for qualification of melt spreading tests. Photo: Argonne National Laboratory (ANL).
Right: Example of corium melt pouring for a melt spreading preparatory test. Photo: Argonne Nat...

The present report summarises the main results and learnings from the third phase of the NEA Behaviour of Iodine Project (BIP-3), which was conducted between 2016 and 2019 by the Canadian Nuclear Lab...

In order to reach a better understanding of countries’ different approaches to the evaluation of vibrations detected in piping systems and components, the NEA Committee on the Safety of Nuclear Insta...