This report presents nuclear plant operator and regulatory practices in the area of severe accident management (SAM) in general and more specifically the regulation of its severe accident mitigation ...

Regulatory inspections of digital instrumentation and control (I&C) hardware and software for systems and components important to safety at nuclear power plants are needed to verify that such systems...

This report presents a study performed on a set of common cause failure (CCF) events of motor operated valves (MOV) within the International Common Cause Failure Data Exchange (ICDE) project. In July...

This report presents a study performed on a set of common-cause failure (CCF) events within the International Common-cause failure Data Exchange (ICDE) project. The topic of the study was external fa...

The Nuclear Energy Agency (NEA) Working Group on Codes and Standards (WGCS) has agreed that a consensus position on the topic of the qualification of existing and new material man facturing technique...

The Nuclear Energy Agency (NEA) Committee on Nuclear Regulatory Activities (CNRA) Working Group on Codes and Standards (WGCS) sponsored a online international workshop on in-service inspection (ISI) ...

Background
Bridge cranes, which are components that handle devices designed to lift and transfer heavy loads, are widely used in the nuclear sector. Assessing the dynamic behaviour of bridge cranes is...

The aim of this second revision of the Best Practice Guidelines (BPG) is to provide guidance to the user of computational fluid dynamics (CFD) codes, both novice and experienced, in the field of nucl...

The objective of this “Kappa Workshop on Earthquake Ground Motions on Rock Sites” (held remotely from 25-28 May 2021), organised by the NEA Working Group on Integrity and Ageing of Components and Str...

The Working Group on Fuel Cycle Safety (WGFCS), which is part of the Committee on the Safety of Nuclear Installation (CSNI) of the Nuclear Energy Agency (NEA), held an international workshop on devel...