Scheme of the PKL facility, Framatome GmbH.
The SESAR Thermal-hydraulics (SETH) Project began in 2001 and consisted of thermal-hydraulic experiments in support of accident management, which were ca...
Multi-compartment THAI+ test facility, Becker Technologies GmbH.
In the wake of the OECD/NEA THAI project, conducted in three phases from 2007 until 2019, a new project, THAI Experiments on Mitigat...
View looking down onto the LOFT reactor
The Loss-of-fluid Test (LOFT) Research Programme was originally set up by the US Nuclear Regulatory Commission. Part of the programme was later broadened int...
The scope of the proposed project is therefore to perform practical exercises of demonstration of the SAPIUM approach.
PANDA vessel assembly (construction phase, 1993), PSI.
The PANDA project is a follow-up of the HYMERES-2 project, and its general objective is to advance the knowledge on the containment of thermal...
The objective of the NEA THAI-3 project was to address open questions concerning the behaviour of hydrogen, iodine and aerosols under severe accident conditions in the containment of water cooled rea...
High-temperature gas-cooled nuclear reactors are one of the next generation reactor designs. This benchmark consists of a multi-staged code-to-code-to-data thermal hydraulics code validation benchmar...
Kick-off workshop of the thermal hydraulic code validation benchmark for high temperature gas-cooled reactors using High Temperature Test Facility (HTTF) data.
The NEA thermal hydraulic code validation benchmark for high temperature gas-cooled reactors using HTTF data (HTGR T/H), supervised by the Expert Group on Reactor Core Thermal-Hydraulics and Mechanic...
PKL facility. Photo: FRAMATOME, Germany
The Experimental Thermal Hydraulics for Analysis, Research and Innovations in Nuclear Safety (ETHARINUS) project serves the objectives of investigating phenome...