Derived Files Plots Warnings & Errors Mapping

NDEC

Files > 64-Gd-157g.jeff33

Z=64 A=157 state=0
Uploaded on Apr 3, 2018 4:06:10 PM
Processing : TERMINATED_OK

relable
0 warn / 0 err
checkr psyche fizcon inter
1 warn / 1 err 0 warn / 0 err 0 warn / 0 err 0 warn / 0 err
  • ERROR module: checkr 
       ERROR(S) FOUND IN MAT=6440, MF= 1, MT=451
     MOD =     1 OUT OF RANGE     0 -     0           SEQUENCE NUMBER   223
     SECTION CANNOT BE CHECKED FROM SEQUENCE NUMBER      223 TO   99999
  • WARNING module: checkr 
       WARNING(S)     IN MAT=6440, MF= 3, MT=251
     MT= 251 ALLOWED IN DERIVED FILES                 SEQUENCE NUMBER     1
moder reconr broadr unresr heatr gaspr thermr purr acer groupr errorr covr
0 warn / 0 err 1 warn / 0 err 0 warn / 0 err 1 warn / 0 err 2 warn / 0 err 0 warn / 0 err 0 warn / 0 err 1 warn / 0 err 0 warn / 0 err 2 warn / 0 err 1 warn / 0 err 0 warn / 0 err
  • WARNING module: reconr 
      ---message from emerge---nonpositive elastic cross sections found.
  • WARNING module: unresr 
      ---message from unresr---mat 6440 has no unresolved parameters
 copy as is to nout
  • WARNING module: heatr 
      ---message from hinit---mf6, mt102 does not give recoil za= 64158
 photon momentum recoil used.
  • WARNING module: heatr 
      ---message from hinit---mf6, mt102 does not give recoil za= 64158
 photon momentum recoil used.
  • WARNING module: purr 
      ---message from purr---mat 6440 has no unresolved parameters
 copy as is to nout
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 91
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 91
 only mf4/mf5 provided
  • WARNING module: errorr 
      ---message from errorr---no data on file for mfcov= 33
 processing terminated
endf2c linear recent sigma1 legend activate merger fixup dictin complot
0 warn / 0 err 4 warn / 0 err 2 warn / 0 err 0 warn / 0 err 20 warn / 0 err 2 warn / 0 err 0 warn / 0 err 1 warn / 0 err 0 warn / 0 err 0 warn / 0 err
  • WARNING module: linear 
     WARNING - Above Cross Section Negative at   251 Energies
  • WARNING module: linear 
     WARNING - Above Cross Section Negative at   250 Energies
  • WARNING module: linear 
     WARNING - Above Cross Section Negative at   251 Energies
  • WARNING module: linear 
     WARNING - Above Cross Section Negative at   250 Energies
  • WARNING module: recent 
     WARNING...WARNING...WARNING...WARNING...WARNING...WARNING...WARNING...WARNING
  • WARNING module: recent 
     WARNING...WARNING...WARNING...WARNING...WARNING...WARNING...WARNING...WARNING
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Decrease with L
  • WARNING module: legend 
     WARNING - Coefficient Has Decreased or Changed Sign
  • WARNING module: legend 
     WARNING - Coefficients do NOT Decrease with L
  • WARNING module: legend 
     WARNING - Coefficient Has Decreased or Changed Sign
  • WARNING module: legend 
     WARNING - Coefficients do NOT Decrease with L
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Decrease with L
  • WARNING module: legend 
     WARNING - Coefficients do NOT Decrease with L
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficient Has Decreased or Changed Sign
  • WARNING module: legend 
     WARNING - Coefficient Has Decreased or Changed Sign
  • WARNING module: legend 
     WARNING - Coefficient Has Decreased or Changed Sign
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: activate 
     64-Gd-157 6440         WARNING - No MF=10 to create - will copy MAT
  • WARNING module: activate 
     64-Gd-157 6440         WARNING - No MF=10 to create - will copy MAT
  • WARNING module: fixup 
     3  16        0        0 WARNING...Section Required for Summation CREATED.