Derived Files Plots Warnings & Errors Mapping

NDEC

Files > 48-Cd-106g.jeff33

Z=48 A=106 state=0
Uploaded on Apr 3, 2018 3:58:30 PM
Processing : TERMINATED_OK

relable
0 warn / 0 err
checkr psyche fizcon inter
0 warn / 0 err 0 warn / 0 err 0 warn / 5 err 0 warn / 0 err
  • ERROR module: fizcon 
       ERROR(S) FOUND IN MAT=4825, MF= 5, MT= 16
     FOR LF=1 EPMAX FOUND TO BE 1.03100E+06 SHOULD BE 1.03500E+05
  • ERROR module: fizcon 
       ERROR(S) FOUND IN MAT=4825, MF= 5, MT= 22
     FOR LF=1 EPMAX FOUND TO BE 3.54000E+05 SHOULD BE 1.54000E+04
  • ERROR module: fizcon 
       ERROR(S) FOUND IN MAT=4825, MF= 5, MT= 28
     FOR LF=1 EPMAX FOUND TO BE 5.85000E+05 SHOULD BE 6.93000E+04
  • ERROR module: fizcon 
       ERROR(S) FOUND IN MAT=4825, MF= 5, MT= 32
     FOR LF=1 EPMAX FOUND TO BE 1.74000E+06 SHOULD BE 1.43000E+05
  • ERROR module: fizcon 
       ERROR(S) FOUND IN MAT=4825, MF= 5, MT= 33
     FOR LF=1 EPMAX FOUND TO BE 5.50000E+05 SHOULD BE 1.63000E+05
moder reconr broadr unresr heatr gaspr thermr purr acer groupr errorr covr
0 warn / 0 err 1 warn / 0 err 0 warn / 0 err 0 warn / 0 err 2 warn / 0 err 0 warn / 0 err 0 warn / 0 err 0 warn / 0 err 1 warn / 0 err 12 warn / 0 err 1 warn / 0 err 0 warn / 0 err
  • WARNING module: reconr 
      ---message from rdf2bw---calculation of angular distribution not installed.
  • WARNING module: heatr 
      ---message from hinit---mf6, mt102 does not give recoil za= 48107
 photon momentum recoil used.
  • WARNING module: heatr 
      ---message from hinit---mf6, mt102 does not give recoil za= 48107
 photon momentum recoil used.
  • WARNING module: acer 
      ---message from consis---consistency problems found
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 16
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 22
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 28
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 32
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 33
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 91
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 16
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 22
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 28
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 32
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 33
 only mf4/mf5 provided
  • WARNING module: groupr 
      ---message from conver---cannot do complete particle production for mt= 91
 only mf4/mf5 provided
  • WARNING module: errorr 
      ---message from errorr---no data on file for mfcov= 33
 processing terminated
endf2c linear recent sigma1 legend activate merger fixup dictin complot
0 warn / 0 err 0 warn / 0 err 2 warn / 0 err 0 warn / 0 err 10 warn / 0 err 2 warn / 0 err 0 warn / 0 err 0 warn / 0 err 0 warn / 0 err 0 warn / 0 err
  • WARNING module: recent 
     WARNING...WARNING...WARNING...WARNING...WARNING...WARNING...WARNING...WARNING
  • WARNING module: recent 
     WARNING...WARNING...WARNING...WARNING...WARNING...WARNING...WARNING...WARNING
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficient Has Decreased or Changed Sign
  • WARNING module: legend 
     WARNING - Coefficient Has Decreased or Changed Sign
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: legend 
     WARNING - Coefficients do NOT Start Equal to Zero.
  • WARNING module: activate 
     48-Cd-106 4825         WARNING - No MF=10 to create - will copy MAT
  • WARNING module: activate 
     48-Cd-106 4825         WARNING - No MF=10 to create - will copy MAT